A properly-installed and well-maintained furnace should be able to last many years before failing, usually around 15-20. However, accidents can happen, and even reliable furnaces can have a sudden breakdown. If this happens in the winter, it’s important to know what to do, because a house without heating can become dangerous.
The first thing you should do is call for a heating furnace repair service, and hope they can get there as soon as possible. Here are some tips for dealing with broken heat in the winter.
Keeping Warm When Your Heat Goes Out
1 – Block cold air flow
If your heat goes out, try to preserve what heat is in the house. Close the blinds, and if possible, drape blankets over the windows and doors to add insulation. If you have drafty spots, such as the bottoms of doors, push towels into the cracks to prevent cold air from getting in.
2 – Use alternative heaters
If you have space heaters, or a fireplace, you’ll be in decent shape. These can keep you warm in a pinch, at least warm enough that there’s no health danger. However, be aware that space heaters can use a lot of power. Be careful not to overload your outlets or circuit breaker. The last thing you want is the power going out alongside the furnace outage.
If you don’t have those, heating pads or heated blankets can also be valuable sources of warmth.
3 – Run hot appliances
This is a stopgap and wastes a lot of energy, appliances such as your oven or clothes washer can generate quite a bit of heat. Spending a day with your family huddled around the oven or stove isn’t much fun, but it’s better than being freezing cold.
One warning: do not do this with a gas-powered oven. This can lead to dangerous levels of carbon monoxide getting into your home. The same is true of any other gas-powered appliances, such as grills. However, it’s safe with electric or wood-fired appliances.
4 – Protect your pipes
People often forget about the possibility of pipes freezing when the heat goes out, but it’s a serious concern. If the pipes freeze, they could burst, and only add to your problems.
So while you wait for the heating furnace repair crew to arrive, open up all the cabinets and other doors leading to exposed pipes, such as under the sink. If you have a space space heater, keep it running near vulnerable pipes. Also, turn on all the faucets so that they’re dripping just a little. The flowing water is harder to freeze.
If your heat goes out in the winter, it can be dangerous, so don’t wait to call for furnace repair. Melton’s Heating & Air Conditioning provides excellent affordable furnace repair and replacement services across the Salem, OR area. Whenever you need help with your heating, just give us a call and we’ll be there ASAP.
Tips for Avoiding High AC Unit Repair Costs in Salem, Oregon
Temperatures can vary drastically throughout the year in Salem, Oregon, which makes a functional and efficient AC system crucial. While these systems are designed to provide a decade or more of reliable service, they won’t last forever without proper care. Fortunately, there are effective strategies to extend the lifespan of your AC unit and steer clear of costly repairs.
In this guide from our team at Melton’s Heating & Air Conditioning, we explore tips to maintain your AC and furnace, highlight the costliest components, and explain how simple actions can save you money in the long run.
Understanding High Costs in HVAC System Repairs
HVAC systems comprise various components, some of which can be quite expensive to replace if they fail. Key parts like the compressor, which acts as the heart of your HVAC system by circulating refrigerant, are crucial and costly. Other important components include the evaporator and condenser coils, essential for heat exchange and dissipation, and the blower motor, which distributes air throughout your home.
For furnaces, the most expensive parts usually include the heat exchanger, which is important for transferring heat, the ignitor that starts the combustion process, the gas valve, and the control board that regulates furnace operations. Understanding these components’ roles and their replacement costs can prepare homeowners to make better maintenance decisions to prevent failures.
The Consequences of Neglecting Your HVAC System
Neglecting your HVAC unit can lead to a domino effect of mechanical failures and increased operational costs. For instance, something as simple as not replacing an air filter can restrict airflow, strain your system, and cause the coils to clog, all of which reduce efficiency and hasten the wear and tear on your system. This can translate into higher energy bills and premature breakdowns of important and expensive parts.
In addition, ignoring minor issues like refrigerant leaks can force your AC to work harder and potentially lead to compressor damage—a repair that can cost thousands. Skipping annual inspections might mean missing out on identifying serious issues like a cracked heat exchanger, which is expensive to fix and potentially dangerous.
Tips to Avoid Costly Repairs and Replacements
Taking proactive steps to maintain your AC system is important. Here’s how you can avoid expensive repairs and replacements to ensure your system runs smoothly and efficiently:
Regular Maintenance
Regular professional maintenance is the cornerstone of AC care. When you schedule annual inspections, skilled technicians can take care of small issues before they escalate into major, costly problems. They’re trained to spot potential failures that might not be obvious to the untrained eye. They can adjust settings, lubricate moving parts, and ensure that your system is running at peak efficiency.
Replace Air Filters Regularly
Air filters are your AC unit’s first line of defense against dust and other particulates. When filters become clogged, airflow is restricted, which forces your system to work harder, increases wear and tear, and decreases efficiency. When you change your air filters every one to three months, you ensure that your system maintains proper airflow and efficiency, which can extend the life of your system.
Clean Coils
The condenser and evaporator coils play important roles in the heat exchange process, but they are prone to dirt and debris buildup, which can impair how they function. Keeping these coils clean is vital for reducing strain on the system and ensuring efficient operation. This can be done during routine maintenance checks or by scheduling additional cleanings in environments that are dustier or have higher air pollutant levels.
Address Refrigerant Leaks Quickly
Refrigerant leaks reduce the efficiency of your AC unit and lead to major damage to the compressor and other important parts. If you notice your system isn’t cooling properly or see signs of leakage, it’s important to call a professional immediately. Quick repairs can prevent more extensive damage that could be far more expensive to fix later.
Invest in Programmable Thermostats
Programmable thermostats are a small investment that can lead to big savings. By allowing you to set and automatically adjust the temperature based on the time of day, you can minimize the operation when it’s not needed, which reduces wear and tear on the system. This smart technology can adapt to your lifestyle and lower your energy bills by maintaining the best comfort levels.
Upgrade Old Units
Older AC units tend to be less efficient and more prone to breakdowns. If your unit is nearing the end of its expected lifespan or has required multiple repairs, it might be time to consider an upgrade. Modern AC systems are more energy-efficient, more reliable, and give you improved features that enhance indoor comfort. Although the upfront cost can be higher, the long-term savings in reduced repair costs and lower energy bills can make it a worthwhile investment.
Keep Your AC in Top-Notch Shape
Routine maintenance is key to extending the life of your AC system and ensuring it operates efficiently year-round. In Salem, companies like Melton’s Heating & Air Conditioning offer full services that include checking for wear and tear, cleaning, lubricating components, and replacing parts that show signs of deterioration. Such proactive service prevents more severe issues as well as keeps your system running smoothly.
Contact Melton’s Heating & Air Conditioning for Top AC Unit Repair Services in Salem, Oregon
When it comes to maintaining or repairing your AC unit in Salem, Melton’s Heating & Air Conditioning stands ready to offer top-tier service. Our team of technicians is well-versed in diagnosing and taking care of a range of AC issues, from routine maintenance to complex repairs.
To ensure your system is in its best condition and to avoid costly future repairs, schedule a maintenance or tune-up service by reaching out to us. Take proactive steps today to protect your investment and enhance your home’s comfort and safety!
As temperatures drop, maintaining a warm and cozy home becomes a top priority for homeowners. While it’s tempting to simply crank up the thermostat, understanding the various types of home heating systems can lead to more efficient energy use and improved comfort.
In this blog, our team at Melton’s Heating & Air Conditioning walks you through some of the most common heating systems found in modern homes.
Forced Air Furnaces
Forced air distribution systems, commonly known as furnaces, are the most prevalent type of home heating system. These systems use a blower fan to distribute heated air throughout the house via a network of ducts. The fuel sources for forced air furnaces can be either natural gas, propane, oil, or electricity. Their advantage is that they combine heating and cooling capabilities in one system.
Heat Pumps
Heat pumps represent the latest advancement in home heating technology. They operate by extracting heat from the air outside and transferring it indoors through an air handler. Heat pumps can run on either natural gas or electricity. They’re a popular choice due to their ability to switch to air conditioning mode in summer.
Ductless Mini-Split Systems
A popular variant of heat pumps is the ductless mini-split system. These flexible units consist of a small outdoor compressor and indoor air handlers that can be placed in different rooms, allowing for precise temperature control in each space.
Boilers and Radiators
Often found in older homes and apartments, boiler systems circulate steam or hot water through pipes to radiator units throughout the house. They run on natural gas, propane, fuel oil, biodiesel blends, or electricity. Boilers and heaters are advantageous because they provide comfortable heat without drying out the air.
In-Floor Radiant Heating
Radiant systems offer even heat distribution by using plastic water tubing or electrical wiring installed beneath the floor. This type of heating is available through gas, propane, electricity, or solar hot water systems. They provide steady, even heat across the entire home.
Choosing the Right System for Your Home
When selecting a heating system, consider factors such as:
Your local climate
The size and layout of your home
Energy efficiency ratings
Installation and maintenance costs
Integration with existing HVAC components
Understanding these various heating options can help you make the best decision about your home’s comfort and energy use. Whether you’re building a new home, replacing an outdated system, or simply curious about your current setup, knowledge of these heating systems is valuable for any homeowner.
Schedule Heating and Cooling Services in Salem with Melton’s Heating & Air Conditioning!
To ensure your home heating system is operating at peak efficiency, regular maintenance is essential. Our team of experienced professionals at Melton’s Heating & Air Conditioning is ready to assist you with all your heating and cooling needs. From system inspections and tune-ups to repairs and new installations, we’re committed to keeping your home comfortable year-round.
Contact us today to schedule your heating system service in Salem, OR, today!
